Specifications of Complete Equipment 

  1. Setter
  • Egg Capacity: 19200 (PC)
  • Number of trolleys: 4 (PC)
  • External Dimensions: 3360×2235×2375(mm)
  • Specification of trolley(Capacity \tier\quantity\dimension: 4800\16\4\570×1540×2100(mm)
  • Specification of egg tray (capacity\quantity\dimension):150\2\502×732×37(mm)
  • Apparent Power: 84(alternative)
  • Insulation Resistance: ≥2MΩ
  • Control Range of Temperature : 31.50℃~39.00℃
  • Control Range of Humidity : 40~80% RH
  • Timing length of Turning: 60/120min
  • Turning Angle: 53°
  1. Hatcher
  • Egg Capacity: 19200 (PC)
  • Number of trolleys: 4 (PC)
  • External Dimensions: 3360×2235×2375(mm)
  • Specification of hatcher trolley(Capacity \tier\quantity\dimension: 4800\16\4\1640×560×250(mm)
  • Specification of hatcher basket (capacity\quantity\dimension):150\2\533×800×120(mm)
  • Apparent Power:84KW
  • Insulation Resistance: ≥2MΩ
  • Control Range of Temperature: 34.40℃~38.60℃
  • Control Range of Humidity: 40~80% RH

(Refer to the instructions included with the hatcher , if any difference appears.)

Main features
1. With all functions of “Fuzzy computer cabinet-style incubatory equipment.”
2. Set supervising equipment for hardware and software, avoiding “break down.”
3. Apply power supply source equipped with electronics detective devices, add device of “phase failure protection board”, system can stop action of stirring fan automatically and send voice & light alarm when there are phase failure, phase partial and phase disorder occurred on power supply source.
4. Can choose control function through combination keys on control panel, more convenient and flexible for operation.
5. Strong update ability of software, software system can proceed function extension and version update.
6. Detection system apply electromagnetic components instead of technical components, making sensitivity of detection higher and response rapider;
7. Equipment can equip with water heating (cooling) component, can according to equipment’s temperature change status start or shut down automatically function of electric heating; also can work in water and electric simultaneously.

 

 

STRUCTURES FOR INCUBATOR&HATCHER
Multi-information display cabinet
Control panel of this model can display not only measured values of temperature, humidity inside box part and damper as well as amount of egg turning, also display setting values of them, as well as position of egg trolley, position of damper, working status of +5V power supply source, working status of water heating (water cooling) and electricity heating, making each setting value and measured value of incubating process clear; meanwhile, equipment has added functions of phase failure protection for fan power supply, lift reliability of control system.
DAMPER SYSTEM HUMIDIFYING MECHANISM AND &HEATING PIPE
 Damper- control system works in two modes: setting position and self-adjusting modes. 1. Dampening is worked at an interval model, which can reduce a negative impact from temperature field in the cabinet. Nylon stand, Never rustiness.

2. The intelligent fuzzy control technology is used for heating. Stainless heating pipe.

AIR-COOLING SYSTEM AGITATING FAN SYSTEM
The working time is calculated according to the difference between actual temperature and set value and the speed of the temperature rising by fuzzy control system. Form Uniform Temperature field.

 

 

EGG TURNOVER MECHANISM EGG TURNOVER DEDTECTION
The egg-turnover function can be worked at an interval mode automatically (the interval can be set in one or two hours by manufacturer).and the interval LED will display 1 or 2 hours. The egg-turnover function can be worked at an interval mode automatically.

 

  1. Ambient Conditions

  To achieve the best performance and optimal incubating effects, the following ambient conditions are necessary for the hatchery hall:

  1. Ambient temperature: 20~27 ℃ ( optimal: 25℃)
  2. Ambient humidity: 50—80%RH
  3. Power supply:
    • Three-phase five-wire system( three phase lines, one neutral line and one grounding line), 380/220VAC 50HZ±10%
    • A separate air switch (380 VAC/40A is recommended) or a knife-break switch with fuse (380VAC/60A) is equipped for each incubator to cut off electric connection between the power grid and incubator.
    • Copper wires or cables with section of over 3.0mm2 are used as the electric connections from air switches or knife-break switches to incubators. Besides, current leakage protectors are indispensable.
  4. Water supply: clean soft water under pressure of 0.3~0.5 MPa.
  5. Flatness of floor: flatness≤5mm/10m2, with drainage ditches for sewage draining.
  6. Height of the incubating hall: ≥5m, well ventilated, CO2 content≤0.1%, and the exhaust gas from incubators must be vented out of the room.
  7. Compressed air: 0.6~0.8Mpa pressure for egg-turning; recommended compressor: air displacement: 0.8m3/min, working pressure: 1.0Mpa.
  8. Operator: responsible and well trained; abide by instructions in this manual and the methods instructed by the trainers.

Notice: although the incubator can still be put into use when the ambient and electric conditions are substandard, the service life and incubating effects will be discounted. We suggest you use AC regulators from our company. Do not use regulators without quality certificates.

13 COMMENTS

  1. Thank you for the auspicious writeup. It in fact was a amusement account it. Look advanced to more added agreeable from you! By the way, how can we communicate? Michel Gothart Aldric

  2. Normally I do not read article on blogs, however I wish to say that this write-up very compelled me to take a look at and do so! Your writing style has been surprised me. Thank you, very great post. Audy Anders Morrie

  3. Excellent weblog here! Also your site quite a bit up very fast! What web host are you the use of? Can I am getting your affiliate hyperlink to your host? I wish my website loaded up as quickly as yours lol Jacquelyn Loy Deirdre

  4. Great post. I was checking continuously this blog and I am impressed! Extremely helpful information particularly the last part I care for such info a lot. I was seeking this certain info for a very long time. Thank you and good luck. Cristie Rodolphe Jenine

  5. Good day! This post could not be written any better! Reading this post reminds me of my old room mate! He always kept talking about this. I will forward this write-up to him. Pretty sure he will have a good read. Thank you for sharing! Lulu Silvio Gilliette

  6. This was both entertaining to listen to but also literally fascinating. This is a wonderful series of podcasts. I look forward to hearing future podcasts Federica Rod Newcomb

  7. I really wanted to write down a small comment to be able to appreciate you for all of the unique tricks you are showing on this website. My extensive internet research has finally been paid with professional facts to exchange with my classmates and friends. I would assume that we site visitors actually are extremely fortunate to exist in a useful community with very many outstanding individuals with insightful suggestions. I feel really fortunate to have seen the site and look forward to so many more fabulous minutes reading here. Thanks once more for all the details. Cristine Ase Seessel

  8. Can I just say what a relief to seek out someone who actually knows what theyre speaking about on the internet. You positively know find out how to bring a problem to mild and make it important. Extra individuals have to read this and perceive this side of the story. I cant believe youre not more in style because you positively have the gift. Freddy Stanislaus Edris

  9. I feel that is among the most vital information for me.
    And i’m glad reading your article. However wanna statement on few common issues, The site taste is wonderful, the
    articles is really great : D. Excellent process, cheers

Leave a Reply to Austin Cancel reply

Please enter your comment!
Please enter your name here